Sorry about your Drum Sander. Hope you got both the Top and the Sander fixed! Sometimes, things just don't seem to want to go right. Build is looking good.
Regards,
Bill from down the hill.
Ron Steiger Harp Guitar
-
Ventura Bill
- Posts: 226
- Joined: Mon Aug 25, 2008 12:08 am
- Include Off Topic: Yes
- Location: Ventura, CA USA
Re: Ron Steiger
Boy Ron, BUMMER!
Sorry about your Drum Sander. Hope you got both the Top and the Sander fixed! Sometimes, things just don't seem to want to go right. Build is looking good.
Regards,
Bill from down the hill.
Sorry about your Drum Sander. Hope you got both the Top and the Sander fixed! Sometimes, things just don't seem to want to go right. Build is looking good.
Regards,
Bill from down the hill.
Ventura Bill
If it ain't broke, don't fix it. Doesn't fit? Get a bigger hammer.
If it ain't broke, don't fix it. Doesn't fit? Get a bigger hammer.
-
Eben
- Chairman Emeritus
- Posts: 6152
- Joined: Thu Aug 21, 2008 9:58 am
- Include Off Topic: Yes
- Location: Lummi Bay, WA
- Contact:
Re: Ron Steiger
Hey, man;
Sorry 'bout the top!
My sander was doin' this for a bit - It was when I changed brand of belts I was using - The old ones, I could wrap tight; the new ones did what yours did when I wrapped them the same way - I now give 'em about 1/2" between wraps and no more problems - Hope that helps!
E
Sorry 'bout the top!
My sander was doin' this for a bit - It was when I changed brand of belts I was using - The old ones, I could wrap tight; the new ones did what yours did when I wrapped them the same way - I now give 'em about 1/2" between wraps and no more problems - Hope that helps!
E
-
Ron
- Posts: 209
- Joined: Thu Sep 18, 2008 9:00 am
- Include Off Topic: Yes
- Location: ventura ,calif
- Contact:
Re: Ron Steiger
What do you mean ....wrapped..I dont understand! ( like ex-room were the sand paper fit into the holder)Eben wrote:Hey, man;
Sorry 'bout the top!
My sander was doin' this for a bit - It was when I changed brand of belts I was using - The old ones, I could wrap tight; the new ones did what yours did when I wrapped them the same way - I now give 'em about 1/2" between wraps and no more problems - Hope that helps!
E
.The one's I get do not have room on the ends for play...were are you guys getting your sanding belts? I try to keep the belts tight ,the other thing is , is all the belts the same size?
also I was able to fix the sander and sand the top clean...That made my day...........
Ron
http://www.harpguitar.info" onclick="window.open(this.href);return false;
If you can think it, Ill try to make it
If you can think it, Ill try to make it
-
Eben
- Chairman Emeritus
- Posts: 6152
- Joined: Thu Aug 21, 2008 9:58 am
- Include Off Topic: Yes
- Location: Lummi Bay, WA
- Contact:
Re: Ron Steiger
My first batch were Delta, and when I wrapped them around the drum, I could do it so each wrap was tight to the next.
I get mine from Woodworker, and I use this Zirconia stuff which lasts really well - http://www.woodworker.com/cgi-bin/FULLP ... der%20Roll
With this stuff, when I wrapped it around the drum as I had been doing with the Delta stuff, it did exactly what yours did -Now, I leave about 1/2" between each wrap and no more problems!
E
I get mine from Woodworker, and I use this Zirconia stuff which lasts really well - http://www.woodworker.com/cgi-bin/FULLP ... der%20Roll
With this stuff, when I wrapped it around the drum as I had been doing with the Delta stuff, it did exactly what yours did -Now, I leave about 1/2" between each wrap and no more problems!
E
-
Ron
- Posts: 209
- Joined: Thu Sep 18, 2008 9:00 am
- Include Off Topic: Yes
- Location: ventura ,calif
- Contact:
Re: Ron Steiger
like 1/2 spacing gap per wrap!mmmm I try it...thanks eben for the link....I check it out right now ...
Ron
Ron
http://www.harpguitar.info" onclick="window.open(this.href);return false;
If you can think it, Ill try to make it
If you can think it, Ill try to make it
-
Ron
- Posts: 209
- Joined: Thu Sep 18, 2008 9:00 am
- Include Off Topic: Yes
- Location: ventura ,calif
- Contact:
Re: Ron Steiger
Hey Glen
how your boy doing
Ron
how your boy doing
Ron
http://www.harpguitar.info" onclick="window.open(this.href);return false;
If you can think it, Ill try to make it
If you can think it, Ill try to make it
-
Green Mountain Guitars
- Posts: 564
- Joined: Sat Aug 23, 2008 5:46 pm
Re: Ron Steiger
He is doing good. Thanks for asking. 
Glen
Glen