Hey, wow, that's way generous of you, Buddy - Thanks!
It will go to very good use, guaranteed!
E
Ron Steiger Harp Guitar
-
Ron
- Posts: 209
- Joined: Thu Sep 18, 2008 9:00 am
- Include Off Topic: Yes
- Location: ventura ,calif
- Contact:
Re: Ron Steiger
ok I checked all my sides and she a go...
I finish the bending with a hot pipe and and now I check all the fitting...
now the fit looks good time to glue her up..like I said I glued her up last night and now she really to sand the back and install the kerf
( now I use my big stick....lol....to sand the back.
now I check to make sure she going to pass ( if she even worth putting time into it...and she pass...( i can get the right height bridge in her)
..on to the next thing...kerfing and resawing the back...
..thanks for looking guys ..
Ron
http://www.harpguitar.info" onclick="window.open(this.href);return false;
If you can think it, Ill try to make it
If you can think it, Ill try to make it
-
Ron
- Posts: 209
- Joined: Thu Sep 18, 2008 9:00 am
- Include Off Topic: Yes
- Location: ventura ,calif
- Contact:
Re: Ron Steiger
Hey Eben
I got the ebony board today , Look's good man...after all those years , It like a rock hard piece of wood, and it came from a tree.
thanks grant and eben.....really...you can't buy this kind of stuff...
Ron
I got the ebony board today , Look's good man...after all those years , It like a rock hard piece of wood, and it came from a tree.
thanks grant and eben.....really...you can't buy this kind of stuff...
Ron
http://www.harpguitar.info" onclick="window.open(this.href);return false;
If you can think it, Ill try to make it
If you can think it, Ill try to make it
-
Ron
- Posts: 209
- Joined: Thu Sep 18, 2008 9:00 am
- Include Off Topic: Yes
- Location: ventura ,calif
- Contact:
Re: Ron Steiger
..resawn the back in 3 pieces ...bookmatch look good...
I go with it...
Ron
http://www.harpguitar.info" onclick="window.open(this.href);return false;
If you can think it, Ill try to make it
If you can think it, Ill try to make it
-
Eben
- Chairman Emeritus
- Posts: 6152
- Joined: Thu Aug 21, 2008 9:58 am
- Include Off Topic: Yes
- Location: Lummi Bay, WA
- Contact:
Re: Ron Steiger
hey, very cool, buddy!
Glad you like it.
E
Glad you like it.
E
-
Ron
- Posts: 209
- Joined: Thu Sep 18, 2008 9:00 am
- Include Off Topic: Yes
- Location: ventura ,calif
- Contact:
Re: Ron Steiger
LITTLE Later in the day I hand sanded the edges ,glued and bookmatch the back..I had to get a close up to see the line ,not bad for not having a shotting board
little later in the same day I glued the glue joint to over lap with a same piece of wood...take a look...
just before I went home I sanded and glued my first brace in a arch disc...I leave this over night..
I have a job in simi valley be back monday ...have a good week end ..and thanks for looking..
Ron
little later in the same day I glued the glue joint to over lap with a same piece of wood...take a look...
just before I went home I sanded and glued my first brace in a arch disc...I leave this over night..
I have a job in simi valley be back monday ...have a good week end ..and thanks for looking..
Ron
http://www.harpguitar.info" onclick="window.open(this.href);return false;
If you can think it, Ill try to make it
If you can think it, Ill try to make it
-
Ron
- Posts: 209
- Joined: Thu Sep 18, 2008 9:00 am
- Include Off Topic: Yes
- Location: ventura ,calif
- Contact:
Re: Ron Steiger
I stop by the shop today on my lunch break and to pick up parts....also so I would have something to do monday(glueing on the back)
trying to finish the glueing on the braces, am done. I still have to show you guys the old (dryer) inside brace patten..I'll do that when I have time.
got to go again...back to the valley...
Ron
http://www.harpguitar.info" onclick="window.open(this.href);return false;
If you can think it, Ill try to make it
If you can think it, Ill try to make it
-
Ron
- Posts: 209
- Joined: Thu Sep 18, 2008 9:00 am
- Include Off Topic: Yes
- Location: ventura ,calif
- Contact:
Re: Ron Steiger
Back from the valley ,For the last time this week....ok am done.....I had to finish glueing the body together because I have to finish this by Nov 1
so am hauling ass on this build....
meaning working on this and my other work(Tile work) driving 45 mi n both ways,Crazy) I know...am done for the day...@ and you guys have it easy..
lol
did I say am done for the day...nop I have to stop by the usp store to ship some ebay wood... If you guys need wood ...(mahogany) just ask ..
harpguitars@gmail.com
again thanks for reading and looking ....
now come's the fun part of the build( making her look pretty) Next is Rope Bindings<
after that am doing and vine inlay....fret board. using a one piece mahogany neck...
so am hauling ass on this build....
meaning working on this and my other work(Tile work) driving 45 mi n both ways,Crazy) I know...am done for the day...@ and you guys have it easy..
lol
did I say am done for the day...nop I have to stop by the usp store to ship some ebay wood...
If you guys need wood ...(mahogany) just ask ..harpguitars@gmail.com
again thanks for reading and looking ....
now come's the fun part of the build( making her look pretty) Next is Rope Bindings<
after that am doing and vine inlay....fret board. using a one piece mahogany neck...
http://www.harpguitar.info" onclick="window.open(this.href);return false;
If you can think it, Ill try to make it
If you can think it, Ill try to make it