Well, I liked the first one so much that I thought I would try another
So, guess what this one is..........
...........Yah, birch bark. It has really thin layers, so when it is sanded down it gets really intricate patterns
The white outside layer is sanded off, so this is the colors from inside the center of the bark.
Thanks again to Pat Foster for the original suggestion. I will be trying other species of bark
G
Another Bark Rosette
- whitespruce
- Site Admin
- Posts: 4367
- Joined: Thu Aug 21, 2008 6:53 am
- Include Off Topic: Yes
- Location: Northern Minnesota, USA
- Pat Foster
- Moderator
- Posts: 1724
- Joined: Sun Nov 30, 2008 12:19 pm
- Include Off Topic: Yes
- Location: Spokane, Eastern Washington
- Contact:
Re: Another Bark Rosette
Looks great, Grant! I might have to try that myself!
Pat
Pat
"The large print giveth, and the small print taketh away." — Tom Waits
__________________________________
http://www.patfosterguitars.com
__________________________________
http://www.patfosterguitars.com
- Dennis Leahy
- Dishwasher
- Posts: 7082
- Joined: Thu Aug 21, 2008 1:59 am
- Include Off Topic: Yes
- Location: looking for a place to live
Re: Another Bark Rosette
Beautiful!
Will it turn gray? Or, is that just the outermost, and outside layer? (I think this is inside out, right? Or, at least you have sanded through the gray outer layer.)
Dennis
Will it turn gray? Or, is that just the outermost, and outside layer? (I think this is inside out, right? Or, at least you have sanded through the gray outer layer.)
Dennis
Dennis Leahy
- whitespruce
- Site Admin
- Posts: 4367
- Joined: Thu Aug 21, 2008 6:53 am
- Include Off Topic: Yes
- Location: Northern Minnesota, USA
Re: Another Bark Rosette
It will stay the color that it is. I have sanded off the outside layers so this surface is about 1/3 of the way into the bark. I just took a square of bark and ran it through my thickness sander until I got past any irregularities and had a smooth surface. Then I sanded a bit off the inner surface until I had a useable thickness. Before I cut out the ring with a router, I give it a coat of shellac to make sure it does not chip out. The process is just as easy as using thin wood or veneer.Dennis Leahy wrote:Beautiful!
Will it turn gray? Or, is that just the outermost, and outside layer? (I think this is inside out, right? Or, at least you have sanded through the gray outer layer.)
Dennis
G
- BaldEagle55
- Posts: 473
- Joined: Sat Aug 23, 2008 6:56 pm
- Include Off Topic: Yes
- Location: Thunder Bay, Ontario, Canada
Re: Another Bark Rosette
Looks very cool Grant... I love your creativity.
Tom
Tom
-
- Posts: 103
- Joined: Sun Jul 17, 2011 1:02 am
- Include Off Topic: Yes
- Location: LaCrosse Wisconsin, USA
- Contact:
Re: Another Bark Rosette
When I use birch bark for a rosette, I glue it to another substrate. I glue the under-layer so the grain goes 90 degrees from the bark. That way the grain of the bark can follow the lines of the top, and it keeps the bark from splitting. I have a build thread on my webpage if you want to follow along. I'm using the reverse side of the bark. It matches the cedar top really nice. http://www.moonlightguitars.com/Buildalong2.html" onclick="window.open(this.href);return false;
visit my website at http://www.MoonlightGuitars.com" onclick="window.open(this.href);return false;
- whitespruce
- Site Admin
- Posts: 4367
- Joined: Thu Aug 21, 2008 6:53 am
- Include Off Topic: Yes
- Location: Northern Minnesota, USA
Re: Another Bark Rosette
Looks good Jason. Nice to see another adventursome soul
G
G