You're all most kind...
Onto one of the scary bits today - putting the frets in. Seemed to go OK. I used a technique 'borrowed' from one of the other forums and tried out successfully on my acoustic: open the top of the slot slightly with a triangular needle file; thin bead of titebond on the tang; hammer one side; hammer the other side; hammer in the middle; finish off with a 12" radius block to ensure it's even.
Here it is in progress:
and here it is this evening after trimming the ends:
Should be able to flatten and crown the frets tomorrow
Thanks for looking
Andy
Finished! Burl Maple SG
- Andyjr1515
- Posts: 52
- Joined: Wed Jul 31, 2013 12:34 pm
Re: Burl Maple SG
Andy - Derby, UK
Plays Guitar, Tenor Sax, Alto Sax, Bass & Bongos in an old man's band (I'm the youngest - this is not a good look! But GREAT fun!!). Makes & mods Electric 6 strings, Acoustic 6-strings and basses
http://www.AJRGuitarmods.co.uk" onclick="window.open(this.href);return false;
Plays Guitar, Tenor Sax, Alto Sax, Bass & Bongos in an old man's band (I'm the youngest - this is not a good look! But GREAT fun!!). Makes & mods Electric 6 strings, Acoustic 6-strings and basses
http://www.AJRGuitarmods.co.uk" onclick="window.open(this.href);return false;
- Andyjr1515
- Posts: 52
- Joined: Wed Jul 31, 2013 12:34 pm
Re: Burl Maple SG
Hi
One or two of you may have already seen this on one of the other forums - if so, apols but I am so b****y excited
Other than final fitting of the neck if my buyer wants it (presently similar to Vintage LP but, of course, he may want it slimmer) it's pretty much finished
I'm pleased with how its come out and how it sounds...AND IT BALANCES !
Here are some shots of the finished article:
What a stupendously satisfying hobby this is
Thanks for looking
Andy
One or two of you may have already seen this on one of the other forums - if so, apols but I am so b****y excited
Other than final fitting of the neck if my buyer wants it (presently similar to Vintage LP but, of course, he may want it slimmer) it's pretty much finished
I'm pleased with how its come out and how it sounds...AND IT BALANCES !
Here are some shots of the finished article:
What a stupendously satisfying hobby this is
Thanks for looking
Andy
Andy - Derby, UK
Plays Guitar, Tenor Sax, Alto Sax, Bass & Bongos in an old man's band (I'm the youngest - this is not a good look! But GREAT fun!!). Makes & mods Electric 6 strings, Acoustic 6-strings and basses
http://www.AJRGuitarmods.co.uk" onclick="window.open(this.href);return false;
Plays Guitar, Tenor Sax, Alto Sax, Bass & Bongos in an old man's band (I'm the youngest - this is not a good look! But GREAT fun!!). Makes & mods Electric 6 strings, Acoustic 6-strings and basses
http://www.AJRGuitarmods.co.uk" onclick="window.open(this.href);return false;
- coopman
- Posts: 843
- Joined: Mon Aug 25, 2008 8:47 am
- Include Off Topic: Yes
- Location: The Fingerlakes NY
- Contact:
Re: Finished! Burl Maple SG
Andy - that looks great. Very nice job. Someday perhaps you can tell us about the electronics?
John Cooper
"Hard pressed on the right. Center is falling. No possibility to maneuver. Situation excellent. I am attacking." - Gen. Ferdinand
"Hard pressed on the right. Center is falling. No possibility to maneuver. Situation excellent. I am attacking." - Gen. Ferdinand
- Michael S
- Posts: 266
- Joined: Wed Nov 26, 2008 1:47 am
- Include Off Topic: Yes
- Location: Miami, Florida USA
Re: Finished! Burl Maple SG
Yep it's a beauty. Impressive work! Thanks for the unorthodox neck through building technique tutorial.
Michael
Michael
- DaveAnderson
- Posts: 1123
- Joined: Fri Nov 21, 2008 10:18 am
- Include Off Topic: Yes
- Location: Clearwater,Fl.
Re: Finished! Burl Maple SG
That is a very beautiful guitar Andy ! Great job!
Anderson Guitars
Clearwater,Fl.
Clearwater,Fl.
- Eben
- Chairman Emeritus
- Posts: 6152
- Joined: Thu Aug 21, 2008 9:58 am
- Include Off Topic: Yes
- Location: Lummi Bay, WA
- Contact:
Re: Finished! Burl Maple SG
Wow, sweet indeed!
Thanks fir sharing.
E
Thanks fir sharing.
E
-
- Posts: 103
- Joined: Sun Jul 17, 2011 1:02 am
- Include Off Topic: Yes
- Location: LaCrosse Wisconsin, USA
- Contact:
Re: Finished! Burl Maple SG
100 times juicier than any Gibson SG i've ever seen! Wow!
visit my website at http://www.MoonlightGuitars.com" onclick="window.open(this.href);return false;