Recycled #5

Times are tough, the world's economy is takin' a beating; What should conscientious luthiers do in response?! How about some scrounge builds! Nothin' fancy, nothin' from far away, and lots of imagination...
Post Reply
User avatar
macadee
Posts: 126
Joined: Sat Feb 11, 2012 1:20 pm
Include Off Topic: Yes
Location: Near Carlisle the great Border City
Contact:

Recycled #5

Post by macadee » Fri Apr 24, 2015 1:08 pm

Hi haven't posted for a bit but I have been busy. Here is another junkyard guitar made from recycled hardwood doors.
Some of the bits and pieces.
Image

My own bracing system using Douglas fir for the soundboard as well as the bracing.

Image

The neck is maple and Sapele all recovered from scrap floorboards and door bits.

Image

The bridge and fretboard are from an old Church floor board it is some sort of Ebony I think, it does not smell like rosewood when cut.

Image

The finished thing

Image

Image

Image

The eagle eyed among you will realize that this one has the hole in the "normal" place, I just thought I'd give it a go. It sounds really nice and has gone to a young lady who is well on the learning curve. I am at the moment working on one for her brother who is a keen learner too.
http://soundcloud.com/macadee-1" onclick="window.open(this.href);return false;

Bruce T
Posts: 91
Joined: Wed Dec 25, 2013 7:29 am

Re: Recycled #5

Post by Bruce T » Fri Apr 24, 2015 1:34 pm

Amazing! I would hardly call it a junkyard guitar.

Bruce

charangohabsburg
Posts: 354
Joined: Tue Oct 19, 2010 6:16 pm
Include Off Topic: Yes
Location: Switzerland

Re: Recycled #5

Post by charangohabsburg » Fri Apr 24, 2015 2:48 pm

What a great looking guitar! - if one likes the strong visual character of fir, and I do like it. 8-)

How is douglas fir to work with? I have some self harvested silver fir (Abies alba) in my wood stash, and for some tasks it is a pain to work with: extremely hard latewood and overly soft earlywood. The appearance is quite similar to your DF top here.
Markus
Image

User avatar
macadee
Posts: 126
Joined: Sat Feb 11, 2012 1:20 pm
Include Off Topic: Yes
Location: Near Carlisle the great Border City
Contact:

Re: Recycled #5

Post by macadee » Sat Apr 25, 2015 4:26 am

Markus, Douglas fir is not bad to work with but tends to be very splitty, it can give you amazing splinters in your fingers but I think it looks superb. I love the characterful appearance. My soundboard is made from 6 pieces of wood cut from a window ledge which resided underneath my living room window and survived the worse of Cumbrian weather for 35 years. I like the bright tone of this wood and the amount of headroom it has, it is very hard wood and very stiff heavier than spruce. And to me absolutely free?
http://soundcloud.com/macadee-1" onclick="window.open(this.href);return false;

charangohabsburg
Posts: 354
Joined: Tue Oct 19, 2010 6:16 pm
Include Off Topic: Yes
Location: Switzerland

Re: Recycled #5

Post by charangohabsburg » Sat Apr 25, 2015 8:04 am

Thank you for the detailed reply. Sure, free wood is some of the coolest things that can happen to an open minded instrument builder. Although, when "it happened" to me (10 cherry trees and one silver fir tree :o ) I was not sure if it was a blessing or a curse, because I had no idea where to store the treasure. Luckily I have a very kind neighbour (not the donator) who even helped me pile up the stuff under the roof of his machinery shelter.
Markus
Image

Post Reply